features lead free as standard rohs compliant* low capacitance - 2 pf esd protection >15 kv applications personal digital assistant (pdas) mobile phones and accessories portable electronics adsl / vdsl cards electrical & thermal characteristics (@ t a = 25 ? unless otherwise noted) CDSOT563-0502 - surface mount tvs diode array *rohs compliant *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications parameter symbol test condition min. typ. max. unit peak pulse current i ppm (t p = 8/20 ?) 6 a storage temperature t stg -55 +25 +150 ? operating temperature t opr -40 +25 +125 ? working peak voltage v wm 5v breakdown voltage v br @ 1 ma, pin 5 to pin 2 6 9 v leakage current @ v wm i l v pin5 = 5 v, v pin2 = 0 v, pin 5 to pin 2 5 ? channel leakage current @ v wm i ch v pin5 = 5 v, v pin2 = 0 v, any i/o to pin 2 1 ? forward voltage v f @ if =15 ma 0.8 1 v clamping voltage v clamp_vdd i pp = 5 a, t p = 8/20? 9 v channel input capacitance c in-1 v pin5 = 5 v, v pin2 = 0 v, v in = 2.5 v, f = 1 mhz 2 2.5 pf channel input capacitance c in-2 v pin5 = oated, v pin2 = 0 v, v in = 2.5 v, f = 1 mhz 2.8 3.6 pf channel to channel input capacitance c cross-1 v pin5 = 5 v, v pin2 = 0 v, v in = 2.5 v, f = 1 mhz 0.4 0.5 pf channel to channel input capacitance c cross-2 v pin5 = oated, v pin2 = 0 v, v in = 2.5 v, f = 1 mhz 0.55 0.65 pf general information the CDSOT563-0502 device provides esd and eft protection for high speed data ports meeting iec 61000-4-2 (esd) and iec 61000-4-4 (eft) requirements. the transient voltage suppressor array offers a working peak reverse voltage of 5 v and minimum breakdown voltage of 6 v. the sot563 packaged device will mount directly onto the industry standard sot563 footprint. bourns chip diodes are easy to handle with standard pick and place equipment and the at con guration minimizes roll away. 5 vdd 6 i/o 1 4 2 13 i/o 2 gnd i/o 1 1/o 2
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications CDSOT563-0502 - surface mount tvs diode array product dimensions this is a molded sot563 package with lead free 100 % matte sn on the lead frame. it weighs approximately 3 mg and has a ammability rating of ul 94v-0. recommended footprint how to order cd sot563 - 05 02 common diode chip diode package sot563 = sot-563 package working peak reverse voltage 05 = 5 v (volts) data lines 02 = 2 data lines typical part marking CDSOT563-0502 ......................................................................52xy (??= date code; ??= package house) 654 123 1.50 - 1.70 (0.059 - 0.067) 0.08 - 0.16 (0.003 - 0.007) 0.17 - 0.27 (0.007 - 0.011) 0.10 - 0.30 (0.004 - 0.012) 1.50 - 1.70 (0.059 - 0.067) 1.10 - 1.30 (0.043 - 0.051) 0.50 (0.020) bsc 0.50 - 0.60 (0.020 - 0.024) millimeters (inches) dimensions = 1.40 (0.055) 0.51 (0.020) 0.51 (0.020) 1.02 (0.040) 0.30 (0.012) typ. typ. typ. typ. typ.
12 1 2 3 4 5 6 7 8 9 10 11 0 5.0 4.5 clamping voltage (v) peak pulse current (a) 5.5 6.0 6.5 7.0 i/o pin to gnd pin vdd pin to gnd pin waveform parameters: t r = 8 s t d = 20 s 3.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 0.00 4.6 forward clamping voltage (v) peak pulse current (a) 4.8 5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 7.0 6.6 6.8 i/o pin to gnd pin vdd pin to gnd pin waveform parameters: t r = 8 s t d = 20 s 4.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.0 0.0 input capacitance (pf) input voltage (v) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 vdd = floated vdd = 5 v f = 1 mhz, t = 25 c 10 20 30 40 50 60 70 80 90 100 110 0 030 25 20 15 10 5 percent of i pp time (s) waveform parameters t t = 8 s t d = 20 s e t t d = t | i pp /2 speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications CDSOT563-0502 - surface mount tvs diode array rating & characteristic curves clamping voltage vs. peak pulse current pulse waveform forward clamping voltage vs. peak pulse current typical variation of c in vs. v in
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications CDSOT563-0502 - surface mount tvs diode array packaging information ....... ....... ....... ....... ....... ....... ....... ....... pa f e t 120 d 2 d d 1 w 1 c index hole p 0 p 1 w b 10 pitches (min.) direction of feed 10 pitches (min.) end trailer device leader start d the product will be dispensed in tape and reel format (see diagram below) dimensions: mm (inches) item symbol sot563 carrier width a 1.78 0.05 (0.069 0.002) carrier length b 1.78 0.05 (0.069 0.002) carrier depth c 0.69 0.05 (0.027 0.002) sprocket hole d 1.55 0.05 (0.061 0.002) reel outside diameter d 178 (7.008) reel inner diameter d 1 50.0 (1.969) min. feed hole diameter d 2 13.0 0.20 (0.512 0.008) sprocket hole position e 1.75 0.10 (0.069 0.004) punch hole position f 3.50 0.05 (0.138 0.002) punch hole pitch p 4.00 0.10 (0.157 0.004) sprocket hole pitch p 0 4.00 0.10 (0.157 0.004) embossment center p 1 2.00 0.05 (0.079 0.002) overall tape thickness t 0.20 0.10 (0.008 0.004) tape width w 8.00 0.20 (0.315 0.008) reel width w 1 14.4 (0.567) max. quantity per reel -- 3000 rev. 09/12 devices are packed in accordance with eia standard rs-481-a. asia-paci c: tel: +886-2 2562-4117 fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 fax: +1-951 781-5700 www.bourns.com
|
